Scaffold Hoists and Gantry Hoists

Lifting Equipment LTD supplies a broad choice of scaffold hoists and also lifting gantry hoists to many industries, in particular builders and roofers, or wherever scaffolding towers are used. Scaffold hoists and gantry hoists provide a very safe, fast and cost efficient way to raise and lower all your tools and materials to any level of the scaffolding you require. We also supply many accessories to use alongside your hoist to further improve your hoisting requirements, such as gin wheels, wheelbarrow chains and mortar buckets.

The gantry hoists come complete with the gantry system as seen below, to enable cantilevered lifting and lowering owing to the counter / ballast weights, but without the need to attach the scaffold hoist to the scaffolding pole.

The scaffold hoists are available in 150Kg and 200Kg maximum lifting capacities, the gantry hoists are available from 300Kg to 800Kg maximum lifting capacities and all are available with varying speeds and heights of lift

Scaffold Hoist LE200RC

Motor Type	Single phase
Voltage	220v
Frequency	50Hz
Max. Lifting Capacity	200Kg
Engine Power	750W
Lifting Speed	23 m/min
Cable Length	25m
Steel Cable Diameter	5mm
Hoist Weight	37Kg
Dimensions (mm)	690 x 210 x 250
Max. Cable Length	35mm

Scaffold Hoist LE15

Motor type	Single phase
Voltage	110v/220v
Frequency	50Hz
Max. lifting capacity	150kg
Engine power	1000W
Lifting speed	33 m/min
Cable length	40m
Steel cable diameter	4mm
Cable breaking point under load	11.28kN
Hoist weight	40kg
Dimensions (mm)	830 x 270 x 520
Extend Reach "A" Frame	745mm to 120mm

Scaffold hoists are all supplied with 2 scaffold brackets and pendant control

LE235 Scaffold Hoists

Motor type	Single phase
Voltage	110v/220v
Frequency	50Hz
Max. lifting capacity	200kg
Engine power	750W
Average lifting speed	23 m/min
Cable length	35m
Steel cable diameter	5mm
Hoist weight	40kg
Dimensions (mm)	830 x 270 x 520
Extend Reach "A" Frame	745mm to 1120mm

LE200 Scaffold Hoist

Motor type	Single phase
Voltage	110v/220v
Frequency	50Hz
Max. lifting capacity	200kg
Engine power	750W
Lifting speed	23 m/min
Cable length	25m
Steel cable diameter	5mm
Cable breaking point under load	23.26kN
Hoist weight	37kg
Dimensions (mm)	690 x 210 x 350
Max. Cable Length	35mm

Scaffold hoists are all supplied with 2 scaffold brackets and pendant control

Gantry Hoist Systems

LE300 MF

Motor type	Singlephase
Voltage	220v
Frequency	50Hz
Max. lifting capacity	500kg
Engine power	1100W
Average lifting speed	11.5 m/min
Cable length	25m
Steel cable diameter	5mm
Cable breaking point under load	17.63kN
Hoist weight	55kg
Dimensions (mm)	860 x 320 x 550
Max. Cable Length	35m

Pendant control and gantry included as standard 110v or 220v supply. Ballast boxes also available

A (mm)	1400
B (mm)	2100
C (mm)	2100
D (mm)	1200
E (mm)	3300

LE500MF

Motor type	Singlephase
Voltage	220v
Frequency	50Hz
Max. lifting capacity	500kg
Engine power	1100W
Average lifting speed	11.5 m/min
Cable length	25m
Steel cable diameter	5mm
Cable breaking point under load	17.63kN
Hoist weight	55kg
Dimensions (mm)	860 x 320 x 550
Max. Cable Length	35m

Pendant control and gantry included as standard 220 volt supply.
Ballast boxes also available

A (mm)	1400
B (mm)	2100
C (mm)	2100
D (mm)	1200
E (mm)	3300

LE500TF

Motor type	Threephase
Voltage	400v
Frequency	50Hz
Max. lifting capacity	500kg
Engine power	1850W
Average lifting speed	29 m/min
Cable length	25m
Steel cable diameter	7mm
Hoist weight	50kg
Dimensions (mm)	860 x 320 x 530
Max. Cable Length	40m

Pendant control and gantry included as standard. 400 Volt supply
Ballast boxes also available

A (mm)	1400
B (mm)	2100
C (mm)	2100
D (mm)	1200
E (mm)	3300

LE800TF

Motor type	Threephase
Voltage	400v
Frequency	50Hz
Max. lifting capacity	800kg
Engine power	1850W
Average lifting speed	14.5 m/min
Cable length	25m
Steel cable diameter	6mm
Hoist weight	60kg
Dimensions (mm)	860 x 320 x 570

Pendant control and gantry included as standard, 400 Volt supply
Ballast boxes also available

A (mm)	1400
B (mm)	2100
C (mm)	2100
D (mm)	1200
E (mm)	3300

Scaffold Hoist Accessories and Gantry Hoist Accessories

Mini Winch-Single Hook Suspension
Capacity	250Kg
Voltage	110v
Motor Type	Single Phase
Height of Lift	20 Metres
Lifting Speed	12 Metres per minute
Extra	IP20 Protection 360 degrees joint saddle hook with s/latch

This mini winch is for indoor user only, can be quickly hooked onto a pole. Supplier with pendant control and 110v plug.

Gin Wheel

Ideal for assisting in manually transporting light loads up a scaffold tower. Self-lubricating wheel, 250mm eyebold suspension point. Supplied with 18mm diameter rope up to 220 metres long.

Wheel Barrow Sling

Wheelbarrow chain, ideal for lifting complete wheelbarrow to varying levels on site. Supplied painted blue. Safe working load 500Kgs with test certificate issued.

300Kg / 500Kg Ballast

Ballast Boxes ideal for ease of counter balancing cantilevered gantry system. Two capacities available 300Kg and 500Kg

80 / 150 Litre Bucket

Ideal for transporting tools and mortar etc. Central lifting point with safety catch to avoid tipping.

Available in 80 Litre - 600W x 480D x 365H
(not including handle) Weight 15Kg

And also 150 Litre - 680W x 600D x 420H
(Not including handle) Weight 25Kg